IEEE1284-C

From HwB

Contents

[edit] Pinout

36 PIN HI-DENSITY CENTRONICS???

Pin Name Dir Description
1 Busy <-- Busy
2 Select <-- Select
3 /nAck <-- Acknowledge
4 /nFault <-- Error
5 PError <-- Paper End
6 data0 <-> Address, Data or RLE Data Bit 0
7 data1 <-> Address, Data or RLE Data Bit 1
8 data2 <-> Address, Data or RLE Data Bit 2
9 data3 <-> Address, Data or RLE Data Bit 3
10 data4 <-> Address, Data or RLE Data Bit 4
11 data5 <-> Address, Data or RLE Data Bit 5
12 data6 <-> Address, Data or RLE Data Bit 6
13 data7 <-> Address, Data or RLE Data Bit 7
14 /nInit --> Initialize
15 nStrobe --> Strobe
16 /nSelectIn --> Select In
17 /nAutoFd --> Autofeed
18 GND --- Signal Ground
19 GND --- Signal Ground
20 GND --- Signal Ground
21 GND --- Signal Ground
22 GND --- Signal Ground
23 GND --- Signal Ground
24 GND --- Signal Ground
25 GND --- Signal Ground
26 GND --- Signal Ground
27 GND --- Signal Ground
28 GND --- Signal Ground
29 GND --- Signal Ground
30 GND --- Signal Ground
31 GND --- Signal Ground
32 GND --- Signal Ground
33 GND --- Signal Ground
34 GND --- Signal Ground
35 GND --- Signal Ground
36 GND --- Signal Ground

Note: Direction is Computer relative Device.

[edit] Contributions

[edit] Sources

  • Microsoft MSDN Library: Extended Capabilities Port Specs

[edit] Info

Retrieved from "http://www.hardwarebook.info/IEEE1284-C"