IEEE1284-B

From HwB

[edit] Pinout

Image:cent36f.png

36 PIN CENTRONICS FEMALE at the Printer.

Pin Name Dir Description
1 nStrobe --> Strobe
2 data0 <-> Address, Data or RLE Data Bit 0
3 data1 <-> Address, Data or RLE Data Bit 1
4 data2 <-> Address, Data or RLE Data Bit 2
5 data3 <-> Address, Data or RLE Data Bit 3
6 data4 <-> Address, Data or RLE Data Bit 4
7 data5 <-> Address, Data or RLE Data Bit 5
8 data6 <-> Address, Data or RLE Data Bit 6
9 data7 <-> Address, Data or RLE Data Bit 7
10 /nAck <-- Acknowledge
11 Busy <-- Busy
12 PError <-- Paper End
13 Select <-- Select
14 /nAutoFd --> Autofeed
15 GND --- Signal Ground
16 GND --- Signal Ground
17 GND --- Signal Ground
18 GND --- Signal Ground
19 GND --- Signal Ground
20 GND --- Signal Ground
21 GND --- Signal Ground
22 GND --- Signal Ground
23 GND --- Signal Ground
24 GND --- Signal Ground
25 GND --- Signal Ground
26 GND --- Signal Ground
27 GND --- Signal Ground
28 GND --- Signal Ground
29 GND --- Signal Ground
30 GND --- Signal Ground
31 /nInit --> Initialize
32 /nFault <-- Error
33 GND --- Signal Ground
34 GND --- Signal Ground
35 GND --- Signal Ground
36 /nSelectIn --> Select In

Note: Direction is Computer relative Device.

[edit] Contributions

[edit] Info

Retrieved from "http://www.hardwarebook.info/IEEE1284-B"