From HwB
Available in the Microsoft Xbox 360.
[edit] Pinout
1 29
__________________________________
\ . . . . . . . . . . . . . . . / At the Xbox 360
\ . . . . . . . . . . . . . . . /
--------------------------------
2 30
| Pin | Description
|
| 1 | Red Gnd
|
| 2 | Green Ground
|
| 3 | Red (Pr in component mode)
|
| 4 | Green (Y in component mode)
|
| 5 | Composite Gnd
|
| 6 | Blue Ground
|
| 7 | Composite (Sync in RGB mode)
|
| 8 | Blue (Pb in component mode)
|
| 9 | H-sync Gnd
|
| 10 | V-sync Gnd
|
| 11 | H-sync (VGA Mode)
|
| 12 | V-sync (VGA Mode)
|
| 13 | Audio-R Gnd
|
| 14 | Audio-L Gnd
|
| 15 | Audio-R
|
| 16 | Audio-L
|
| 17 | Switching voltage (for SCART pin-8)
|
| 18 | CBL-ID1
|
| 19 | Blanking Signal (for SCART pin-16)
|
| 20 | CBL-ID1.1
|
| 21 | Unknown
|
| 22 | CBL-ID2
|
| 23 | Unknown
|
| 24 | CBL-ID2.1
|
| 25 | Digital Audio (S/PDIF)
|
| 26 | CBL-ID3
|
| 27 | Digital Audio Gnd (S/PDIF)
|
| 28 | CBL-ID3.1
|
| 29 | Optical - +5V
|
| 30 | See J2B1 or J8C1
|
Note: Pin 29 is used to power IC for converting electrical S/PDIF into optical.
[edit] Setting Cable ID
| Connection | Mode
|
| ID1-ID1.1 | VGA mode enabled
|
| ID2-ID2.1 & ID3-ID3.1 | RGB (SCART) mode enabled
|
| ID3-ID3.1 | Component (Y/Pb/Pr) mode enabled
|
| ID2-ID2.1 | Composite (TV) mode enabled
|
[edit] Contributors
[edit] Sources