ISDN S0-Bus

From HwB

(Redirected from S0-Bus)

This cable is used to connect ISDN devices together via an S0-Bus.

Pinout

Rj45m.png

RJ45 MALE CONNECTOR to terminal endpoint (TE).

Name Pin Cable Color Pin Signal
1 1
2 2
1a 3 Orange 3 TX+
2a 4 Blue 4 RX+
2b 5 White/Blue 5 RX-
1b 6 White/Orange 6 TX-
7 7
8 8

Rj45m.png

RJ45 MALE CONNECTOR to network terminator (NT).

Name Pin Cable Color Pin Signal
1 1
2 2
2a 3 Orange 3 RX+
1a 4 Blue 4 TX+
1b 5 White/Blue 5 TX-
2b 6 White/Orange 6 RX-
7 7
8 8

Note: It's important that each pair is kept as a pair. 1a & 1b must be in the pair, and 2a & 2b must be together in another pair. (Just as the tables above show).

Just for your information, this is how the pairs are named:

Pair Pins Common color
1 4 & 5 Blue
2 1 & 2
3 3 & 6 Orange
4 7 & 8

The + side of each pair is called the "tip" and the - side is called the "ring", a reference to old telephone connectors.

Contributions

Sources