ATA (44) Internal
From HwB
ATA=AT bus Attachment
This connector is mostly used for 2.5" internal harddisks.
See ATA Internal for pin 1-40.
44 pin (2.0mm pitch) for 2.5" harddisks.
44 pin (1.27mm pitch) for 1.8" harddisks.
Pinout
44 PIN IDC MALE at the controller & peripherals.
44 PIN IDC FEMALE at the cable.
| Pin | Name | Dir | Description |
|---|---|---|---|
| 41 | +5VL |  |
+5 VDC (Logic) |
| 42 | +5VM | |
+5 VDC (Motor) |
| 43 | GND |  |
Ground |
| 44 | /TYPE | |
Type (0=ATA) |
Note: Direction is Controller relative Devices (harddisks).